Mag-layers-usa GMPI-252010 F1 Manual de usuario descargar pdf (Pagina 7)

MAG.LAYERS

GMPI-252010-F1 Series

Vibration

△L/Lo≦±5%

There shall be no mechanical damage.

The sample shall be soldered onto the

printed circuit board and when a vibration

having an amplitude of 1.52mm and a

frequency of from 10 to 55Hz/1 minute

repeated should be applied to the 3

directions (X,Y,Z) for 2 hours each.

Drop shock

No apparent damage

Dropped onto printed circuit board from

100cm height three times in x, y, z

directions. The terminals shall be protected.

• CLIMATIC TEST

ITEM SPECIFICATION TEST CONDITION

Thermal Shock

(Temperature Cycle)

Temperature: -40℃,85℃ for 30 minutes

each, 100 cycles.

Humidity Resistance

Temperature : 40℃

Humidity: 95% RH

Time: 1000 ± 12 HOURS

High Temperature

Resistance

Temperature: 85℃±2℃

Time: 1000 ± 12 hours

Low Temperature

Resistance

No mechanical damage.

Inductance shall be within ± 5% of the initial

value, and Q (shall be) within ± 30% of the

initial

value.

Temperature : -40℃±2℃

Time: 1000 ± 12 hours

1. Operating Temperature Range: -55 ℃ TO +125℃

2. Storage Condition: The temperature should be within -40℃~85℃

and humidity should be less than

75% RH. The product should be used within 6 months from the time of delivery.

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Mag-layers-usa GMPI-252010 F1 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Mag-layers-usa GMPI-252010 F1